2nd Gen Non-Engine/Transmission A/C lines for a '94?

[NGuzik]

I need the high and low pressure lines for my a/c on my 1994 and cannot find them anywhere... .



Anyone know of somewhere I can get them or have them made?

I'm from michigan, but I'm willing to have them shipped from anywhere really. .

I've tried all the auto supplies places around here with no luck

 

[mwilson]

I need the high and low pressure lines for my a/c on my 1994 and cannot find them anywhere... .



Anyone know of somewhere I can get them or have them made?

I'm from michigan, but I'm willing to have them shipped from anywhere really. .

I've tried all the auto supplies places around here with no luck

Carquest lists the high and low pressure lines. My local branch stocks the high pressure one right in Bangor.

Do you have the Carquest chain in Michigan???



Are these what you need????



DIY lookup page set to your truck...

http://www.carquest.com/webapp/wcs/stores/servlet/subcategory__10151_-1_10651_10117



Pictures



Low pressure line CTC 200577

High pressure line CTC 790019

Mike.

 

[mwilson]

Or is #8 what you are looking for????

 

[mwilson]

From the Dodge Fiche. 1994 is different than 1995-1996.

 

[BigPapa]

Or is #8 what you are looking for????

View attachment 85295

This would be called the manifold line, correct?

 

[mwilson]

This would be called the manifold line, correct?

Yes, I think Carquest is showing one too many hard lines. That manifold line is one piece from condensor to compressor to dryer. Then there is the one hard line and the accumulator.



The manifold line still shows a good Dodge part number.



55035610 but this for a '94 only.



Mike.

 

[NGuzik]

After a week of calling around I couldn't find a single thing... Thank you so much. . Ill have to post a picture of the line I pulled off earlier. Before I pulled off what I though was a single low pressure line I found it was connected to a block on the compressor that also when to the dryer. Line 8 looks to be the one I need, I talked to the local dodge dealer and he showed the same part number but didn't have any anywhere in the USA. . Ill try and give the local car quest a call and see what they can do for me. . Like I said before thank you so much. Cheers Nick

 

[mwilson]

After a week of calling around I couldn't find a single thing... Thank you so much. . Ill have to post a picture of the line I pulled off earlier. Before I pulled off what I though was a single low pressure line I found it was connected to a block on the compressor that also when to the dryer. Line 8 looks to be the one I need, I talked to the local dodge dealer and he showed the same part number but didn't have any anywhere in the USA. . Ill try and give the local car quest a call and see what they can do for me. . Like I said before thank you so much. Cheers Nick

I think that you may have to use a little white lie.



Tell the parts counters that the truck is a '95. I just checked compressors, condensers and accumulators for '94, '95, '96 and '97 trucks. All four years take the same part numbers for each. For some reason that manifold hose is not shown for a '94 but is listed for the other three years.

I would order the '95-'97 manifold hose, compare it to yours. If it matches, use it.



Mike.

 

[NGuzik]

Alright, my poor 94 is getting to be more of a 95 every time I go to the parts store haha