Di Pricol Gauges

[Kernel]

I recently got my Di Pricol boost and pyro installed in a pillar mount and just noticed today that when my lights are on, the pyro fogs up on the inside. When I dim the interior lights, it clears up. This is okay during the day, but at night, that's another story. Anybody else had this problem with Di Pricol or any other brand for that matter? The pyro gauge doesn't seem to be running much warmer than the boost by feeling the gauge face or the mount. Otherwise I am pleased with the gauges.





Scott

 

[GOODE11]

I just installed my diprocal guages and noticed the same thing w/ the fog in my pyro. I am going to contact the vendor Monday AM.



GOODE11

 

[zjones]

Had the same problem (fogging) with a Westach combo & Autometer Trans temp, my Diprocals never did?? Took a few weeks & they all cleared up, haven't had it happen again??

 

[Kernel]

You guys that have had the fogging problem, did it only happen when the lights were on? The pyro did fine today.



Scott

 

[zjones]

Yes only happened when the lights where on. I just assume there was moisture that got in the gauges (was real humid during the install) & just took time to burn it out.

 

[Kernel]

Well, talked to the company I bought the gauge from and they said that somehow moisture must have got in the thing. Anywho, they are sending me a new one free, and postage to send the bad one back to them. It will probably be about 2 weeks in all before they can get it and then send it to me. Otherwise, the pyro works fine and the time ain't that big of a deal to me. Thanks for the replies.



Scott