Thank's,Look at the arm on the brake. If its open then the arm will be closed, no shaft will be visable. If closed just the opisite shaft will be visable, and it will be audible, like theres bubbles in it. Acceleration will not be there if its closed.
Just finished hooking up the EGT gauge it runs 4 at idle and 6-8 crusing on the freeway at 60-70mph what's normal for a stock truck like mine. Could my Pac Brake be sticking. any advise would be great.![]()
The little red wire was on ther illumination fuse. I switched it to the N/A fuse next to it, i used a 20amp and it's all good egt's are sitting around 240- 280 at idle.Idle seems a little high, highway seems Ok.
My Mule idles at 300/325 depending on outside temp and a/c off. Running the highway at 70 mph it will run at 700 to 750 degress. That is on a flat/level road when going up inclines boost and temp will rise depending how steep/long the incline is (engine working harder). They will also drop going down declines (engine working less).
My engine and exhaust are stock.