Genos banjo bolts

[Rcpilotlv]

Well just to let you know, the banjo bolts still need to be tapped out to 1\8. . Received a order and 1/8 male threads wouldn't screw in... . Genos, I thought you fixed this? Any way once tapped all is well.

 

[JHansen]

Rod at Wildcat is another option-pretty sure his are ready to go out of the box.



Jason

 

[Big_Daddy_T]

I recieved the wildcat banjos and they screwed right in. Torque to specs and your good to go. I have an early 24v with the rubber hose between the filter and the injection pump. Im thinking about changing the vp44 banjo for a different fitting. Seems a very simple swap which is about my skill level. The banjos got me 2 more psi at the pump. A good investment in my mind.

 

[Oxjockey]

Is this the tapped on for the gauge or the bored out ones for the fuel lines?



Bryan

 

[kaptn]

Received my banjo from Genos and after fumbling for a half an hour trying to get 1/8 in hose started,I removed the banjo fitting and discovered it wasnt tapped right. I had to force the hose into fitting and basically cut my own threads. Question are the little gaskets only supposed to be used one time?

 

[RSnaith]

If the gaskets have been installed for awhile, I wouldn't reuse them as they've probably been flattened by the torque on the bolt. If all you've done is torqued the bolt down and then removed it a short time later, you're probably ok.



Rod

 

[kaptn]

Thanks Rsnaith.

 

[LBTRS]

Call Rod at Wildcat Diesel, his banjo's are ready to use right out of the box.