Here I am

HELP!! New TPS, problems still there

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Clutch, Exhaust options...Just need help

DTT valve body

Status
Not open for further replies.
Just installed a new TPS from cummins and i thought it would solve the dropping in and out of lockup problems but it still does it. It is not as bad but i cannot stand to drive it. Sometimes it will downshift all the way to 3rd gear. I have run out of ideas. Mabey you guys have some Where else do i look? I am calling Bill K now.


------------------
95 3/4 ton, 4x4, Auto, 235 plate, K&N, straight through exhaust, wastgate mods, more to come, 108,000mi and still going strong
 
If it drops down into third, I would suspect a faulty temp sending unit. Mine went bad on my 94 on the way to the Texas Rally in September. $26 at the Dodge dealership for mine. Took 5 mins. to change and fixed the problem.

------------------
Curtis Harris
1997 3500 Club Cab
"CASPER"
Check out the Lone Star TDR
 
Last edited by a moderator:
Thanks Curtis, That is apparantly what it is i bypassed the sending unit with a 7. 5k ohms resister and the problem went away, mabey i didnt need the TPS but ohwell. I will get the temp sending unit and hope that solves the problem for good
Nick


------------------
95 3/4 ton, 4x4, Auto, 235 plate, K&N, straight through exhaust, wastgate mods, more to come, 108,000mi and still going strong
 
Status
Not open for further replies.
Back
Top