Engine/Transmission (1994 - 1998) how many cc's? need to match turbo

[CATCRACKER]

97 12v 180hp pump

laser cut dv's

zero plate full forward

3000gsk's

afc spring kit

370's



How many CC's will i be flowing this will help me match my turbo.



i am trying to match big single turbo to my fueling mods. i will be converting from auto to 6spd(this may have some bearing in what i should buy as far as the turbine housing size)



hx40w

htb2

htb2/64

htb2/66

 

[CATCRACKER]

piers got this one! 300cc+ with about 16mm of rack is what piers approximated. told me how to get over 350cc 18mm of rack thats one of the reasons you buy your parts from piers. of course until i get a big single turbo it pointless. with a good turbo this should be enough fuel to get me to a touch over 500+. with 370-400cc you think i could lite a htb2/64?

 

[WDimig]

dude youll have no problem at all lighting the HTB2 witht the 14 housing. ive got the killer b2 with the 12 housing, and i have just about identical setup, except for laser cut dv's, and the turbo spools like the stock hx35 with the 12 housing. and ive got enough fuel to see 46 psi, and theres plenty more becuase i can still peg my pre turbo pyrometer. youll love this turbo. im upgrading to the sled puller 66, to see if i cant get rid of some of my egt issue.



wes

 

[CATCRACKER]

wdimig,



i talked with htt and he said go with the sledpuller66 but he said with a heavy trailer you might have some surging... whats a little surging?



when you dynoed at 277 what where your mods? guessing from you sig i assume everything but your 370's got the 277 . i guess if thats the case you should be around 350hp-375? now with the 370's and killerb2 where are you ?

 

[WDimig]

when i dynoed 277 i had stock injectors, and a #8 plate full forward. i had stock turbo with 16cm housing at the time as well, K&N fipk, and 4" exhaust. now ive got a #0 plate full forward, 370's and the killer b2 turbo, and im well over 400rwhp. i wont be on a dyno untill the 30th of april to know for sure, but im shooting for about 440-460hp.



wes

 

[CATCRACKER]

w,



when you get the results let me know what you did



have thought about laser cuts with the sled puller66. add that along with some a stage II head and you will be pushing 550+... . i know money+hp i am in the same boat. i have heard the laser cuts have given as much as 90hp though!



good luck