BK
TDR MEMBER
now have 80K on my 99 2500 4x4.
3 lp's, 3rd one did small line relocation kit.
2 rear drive shaft TC seals.
1 rear drive shaft, yoke eating seal. Thinking need new hanger bearing now.
1 VP44
1 track bar / change to gen 3 bar.
1 set of shocks.
1 set of batteries.
Many sets of front pads.
1 set rear shoes, hardware and cylinders.
1 exhaust system.
1 seat motor
1 headlight switch
1 AC condenser right outside of 3 year warranty. (maybe need another now).
1 oil pan
3 sets of tires, will be going for the 4th soon.
Front brake hoses, last year lost a hose when backing into driveway... 'eeewww . nice place to loose one if you have to loose one.
In the last month. .
Last set of pads, one eat 1 side of a rotor so:
Pads
Rotors
Unitized Bearings (and associated hardware)
Pads
Calipers (one boot had a slit) and hardware.
3 lp's, 3rd one did small line relocation kit.
2 rear drive shaft TC seals.
1 rear drive shaft, yoke eating seal. Thinking need new hanger bearing now.
1 VP44
1 track bar / change to gen 3 bar.
1 set of shocks.
1 set of batteries.
Many sets of front pads.
1 set rear shoes, hardware and cylinders.
1 exhaust system.
1 seat motor
1 headlight switch
1 AC condenser right outside of 3 year warranty. (maybe need another now).
1 oil pan
3 sets of tires, will be going for the 4th soon.
Front brake hoses, last year lost a hose when backing into driveway... 'eeewww . nice place to loose one if you have to loose one.
In the last month. .
Last set of pads, one eat 1 side of a rotor so:
Pads
Rotors
Unitized Bearings (and associated hardware)
Pads
Calipers (one boot had a slit) and hardware.