Mid-Tenn Chapter Roundtable

[Got Smoke?]

Originally posted by JHammock

Mark,

The small plasma cutter is mine so if you need it other than Saturday, that is ok. In fact, it is at my parents house in Castalian Springs. It will cut 1/4" all day long. I ordered a circle cutting guide from Miller today, so I should have it Tuesday.

That's cool. I'm planning on getting the steel on Monday, then I will give you call about cutting on it some. That's very cool that you've already ordered the circle cutting guide, we can try it out VERY soon. :-laf Like I said this box steel I was originally told was 1/4" thick, but yesterday I was told it it actually 3/16" so cutting it shouldn't be a problem. I want to do some 45* angle cuts on the ends to make it flow better. I'm going to see if they can cut one end at a 45* angle when I pick it up though. Hopefully they will have something I can use to cap off the ends too, if not then I will find something at my neighbors mini scrape yard. Then all we have to do it cut some 4" holes in it and I can start collecting other parts... ... 4" pipe... ... 5" OD pipe/etc... ... clamps..... hmmmm I wonder if my old 34" long Miters will be long enough! :-laf Oo.

 

[BigPapa]

Welcome Dodgeman98!

 

[Cumminsman]

welcome to the dark side, dodgeman98

it only goes downhill from here.



woooooooooooooohooooooooooooooo, i get to go to a pull or two next weekend!!!!!!!!!!!1



Gap, tell pops that we are going to pull in smithland, ky on the 18. hope to see ya'll there!



later, nick

 

[Got Smoke?]

Originally posted by Cumminsman

welcome to the dark side, dodgeman98

it only goes downhill from here.

What are you talking about Nick, that's Terry Johnson from Lebanon. He has TWO! CTD's, one a 98 24V with a BD box and injectors, and a 1st Gen with pump work... . he got bit a long time ago! :-laf

 

[WadePatton]

Howdy Terry!



Now, back to the fishin.

 

[Got Smoke?]

Hey Jay, Meacham does this guy look familiar



I'd like to be in the middle myself!! :-laf Oo.



I'd had to stare at the back of this truck ALL the way to Muncie because he has a Edge Juice, and I only had a slide plate! I didn't want none! :{



#ad

 

[Kimber]

Originally posted by JSykes





I picked up a 409 Stainless exhaust system from DPP at the show. Going to put it on this week.

Did you get it put on yet?

 

[Dodgeman98]

Hello everybody! thought i would pop in and say hey. i am looking forward to the pull in ivy bluff. hope to see yall there. holler atchall later.

 

[JSykes]

Yep, got the exhaust system finished up on Saturday morning. The install was really easy. It has a nice mellow sound that is not obnoxious. Kimber, I am surprised you did not hear me running down Barfield Cresent.



Looking forward to getting together at Ivy Bluff. I am going to be on the side lines this year.



Mark, let me know before you make reservations for Schied's. I am definitely wanting to go.



Later,



Jay

 

[Got Smoke?]

Originally posted by JSykes

Mark, let me know before you make reservations for Schied's. I am definitely wanting to go.

I need to make reservations SOON! I'm planning on taking the same company again :-laf so I will be getting a room with doubles. You can just pay me like I did you and it'll be fine.

 

[Piston Slapper]

Ol man called me last night said he bought another truck. Bought him another daily driver... Ol Smokey is going on the trailer! He said last night, you think we can get a cam and Injectors in it by Ivy Bluff? We got em hooked now!!

 

[Got Smoke?]

Originally posted by Piston Slapper

Ol man called me last night said he bought another truck.

What happened to the 03?

 

[Piston Slapper]

He has the 03(red truck) still... thats his get dressed up and go to town truck or taking trip truck.



Ol smokey (white truck)is going to be a dedicated puller/play truck.



96 (black truck) is the new one. It is going to be his daily driver, midly tuned to keep some fuel mileage to it. Ol smokey is only getting about 15 mpg.



To make a long answer short, he has 3 CTD's now... .

 

[Cumminsman]

gap, your old man has fallen off of the deep end now! good luck! Are ya'll gonna make smithland?

 

[Got Smoke?]

Got my box steel today!

Got my 4x6 3/16" box steel yesterday. Took a little bit of rust off and sprayed a little paint on it today just to see how it'd look. Oo.



#ad

 

[Piston Slapper]

no smithland, might be at covington. Daddy not coming, one of two brothers might bring truck though.

 

[Cumminsman]

not sure about covington. will know something soon... ... .....

 

[Piston Slapper]

might have sold my truck... guy coming tonight. On the lookout for 94-98 4x4 manual. Prefer Club Cab, but not necessity... . This truck will be daily driver for a little while, then become a puller so I want something cheap!

 

[Piston Slapper]

Sold my truck today... The guy who sold my daddy the truck (96 4x4 Reg Cab) is buying mine... he wants a Quad Cab, I want a 4x4. I might just by his... it's got an auto It is dawg gone hard to find a 4x4 Club Cab, manual, 12V... or just a 12V manual 4x4 period!

 

[Kimber]

That was quick... . I was goin to see if my dad might of been interested in yours