Here I am

OD off circuit

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Transformer......

The Cummins Power Booster Rally @ Cummins NW

Status
Not open for further replies.
A long time ago there was a link put up here for a nifty little circuit that will shut off OD when the ignition is turned on.

Does anyone know where I can find it? It was very simple and inexpensive, a common circuit used for auto alarms if I remember right.

Thanks, RogerLed
 
Thanks Shovelhead

That is more simple than the other method with a I. C. timer circuit.



I am planning to modify my Triple Lock Commander so that I can have separate settings for when to lock up and unlock using the same idea. When I have it perfected I will put it up here.
 
Beware.......

I'm not really sure what your trying to do with the TL commander.



But as far as defaulting to OD off, make sure you use a high impedance relay. I helped some others that were setting codes. It turned out that the PCM was reading a ground through the relay and it set codes.



E-mail me if you have more questions.



Garrett
 
Status
Not open for further replies.
Back
Top