Tailgate replacement

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

online parts?

Automatic to 6sp

Status
Not open for further replies.
Well it finally happened, I hairlipped a tailgate with a trailer. Any suggestions for replacements? Aftermarket flowthru, junk yard or back to the stealer. BTW 01 1ton 4x4:{
 
Hold your breath before you ask for the dealer price and it isn't even painted! Flowthru will be the cheapest since junkyards know what a new one goes for. There are a lot of new tailgates laying around that have been replaced with flowthrus, if you can find one it will probably be the best bet. Try the TDR classifieds.
 
I bought a tailgate from classifieds for a friend. ABout 365 to the house. Even matched his color to save from painting.
 
I've got one from a 96 1-ton, white with the black plastic across the bottom. Let me know if it might work and if your close to Colorado.
 
'97 3500 tailgate

I've also got a '97 tailgate from a 3500. Never been used. It is Driftwood and Black with lights. If anyone is interested, get in touch. I am in Southern California. Not a scratch on it, Perfect.
 
I'm about as far from Colorado and California as you can get in the continental US, but I'm interested in a tailgate. E-mail me at -- email address removed -- with price Thanks!:cool:
 
Last edited by a moderator:
Hit my tail gait last summer with the gooseneck going through a deep ditch. Are they even remotely repairable?? Maybe I could get by with a set of those bed rails. If anybody has one that's off a '98 or so that's the dark red or candy apple red (not cherry red) color, let me know. It should have a few scratches or else it won't fit the rest of the truck.
 
The 2nd gen tailgate is inherently flimsier than the 1st gen. The second gen uses lighter guage metal and less reinforcing. My 89 tailgate was solid as a rock after 13 years of hard use, but my 94 is cracked at both ends. The only advantage a second gen tailgate has over a first gen is that it's easier to carry after you take it off!!

Knowing that adding reinforcement to a thin guage tailgate only postpones the inevitable, I need a red one my self, but mine is the plain old fire-engine red color!:(
 
May Madness

May Madness=Tribal gathering of Dodge Cummins Diesel truck owners in Pahrump, NV Starting On MAy 1 thru May 5. See threads under Regional Events.



Rick:)
 
I've had good luck buying beds that are take off's from people that put on a utility, or a flat bed... Last on I bought included the lights, and tailgate... . $350... seemed like a good price, since I was only looking for a tailgate also. .



Colin
 
Just got a quote from a local body shop for a new tailgate. Not a dodge but a quality replacement part. Minimum of $850!!!!:--) Needless to say still looking for a take off or salvage yard part. If I have to go that way has anyone had any experience with the aftermarket parts?
 
While I am looking for a good used replacement tailgate, I hate to leave the back open. Has anyone got suggestions for a good flow thru type tailgate and where to get one. Thanks in advance!Oo.
 
Surely there are some others out there that have purchased replacement tailgates. Do you like the V type or the straight type? Where did you get them and how was the quality?



TIA
 
Status
Not open for further replies.
Back
Top