Engine/Transmission (1998.5 - 2002) Quad-adrenalin

[DCreed]

What are people using for fuel pressure sending units? I read on glacier diesels website to use the Isspro -ISP-R8917-03, but it has two hookups on top, is this for when you are using a gauge and a chip like the quad that can read fuel pressure. The reason I am asking is, the quad only has one wire and Im assuming it just works like a temp sender does.

yes but the body of sender must be grounded unless the mount is.

 

[AllianceDiesel]

so the fuel pressure sender should be grounded through the banjo bolt, I'm sure it is, but I guess I never checked to see if the bolt is grounded.

 

[DirtyDodge]

what fuel pressure transducer are u guys using for the fuel pressure, I need to order 2 of them for a couple of people but I can't find any info on which one to use.

I asked the same question to Quadzilla, they told me that I would need to find a0-40psi resistive type fuel pressure sending unit with a 244-33 ohm range. Good luck, if you find something that works, let us know.

 

[Grizly]

Well I hate to be the bad reviewer but, Tech support at Quad is not great for me and I can't get pulse to update vista or xp my 30 days for return is to end soon so I am shipping mine back! does not work corectly for me with all the defueling and jurking in and out of power they stated update pulse and no help found to corect problem... return because of poor performance and bad tech support!!!!

 

[Spunkys Ram]

QUAD's fuel pressure sender is now available and mine will be here on Tuesday!!!

 

[DirtyDodge]

Well I hate to be the bad reviewer but, Tech support at Quad is not great for me and I can't get pulse to update vista or xp my 30 days for return is to end soon so I am shipping mine back! does not work corectly for me with all the defueling and jurking in and out of power they stated update pulse and no help found to corect problem... return because of poor performance and bad tech support!!!!

You are the first person that I have heard that is not happy with this product. Mine is working great, couldn't be happier with it. The computer update is probably a small software issue, did you load the files needed from C:\windows\system32\drivers to run the public flasher? I had to read over this a couple times to get my laptop to recognize the adrenaline.

 

[DirtyDodge]

QUAD's fuel pressure sender is now available and mine will be here on Tuesday!!!

Did you have to pay for this? How much? Seems like it should be free since it was originally part of the adrenaline package? Anyhow, I still want one...

 

[AllianceDiesel]

ya where did you get it? and you didn't pay for the sensor when you bought the quad, they dropped the price on the chips that didn't have the sensor.

 

[Grizly]

You are the first person that I have heard that is not happy with this product. Mine is working great, couldn't be happier with it. The computer update is probably a small software issue, did you load the files needed from C:\windows\system32\drivers to run the public flasher? I had to read over this a couple times to get my laptop to recognize the adrenaline.

No problems update adrenaline I have problems they said to update pulse control monitor = could not update: had major surging problems / defueling alot and after bought new pressure guage from Glacier sensor read on Quad 18psi not in line? this was good new sensor checked ohms and was good but Pulse control monitor not working properly. I may be the first you have heard having problems but I think I will not be the last you heard!



Can't say it's truck problem because I hooked up new flashed Juice w/ Attitude all problems are gone no surging and good power! Also edge has good tech support only slow shipping unit back after flash. Every time I called them they figured out problems quickly.

 

[Spunkys Ram]

They are available on Quad's website for $50. Yes, I had to pay, but as was mentioned, the price was dropped when I purchased it originally to make up for the shortcoming.

 

[JesseJ]

Awesome! I'm going to have to order one because I want to set up a defuel for low fuel PSI as well as EGT.

 

[DirtyDodge]

They are available on Quad's website for $50. Yes, I had to pay, but as was mentioned, the price was dropped when I purchased it originally to make up for the shortcoming.

Thats cool, I just ordered one too.

 

[monkeyman]

Quads Fuel pressure sender is a Stewart Warner Oil Pressure unit. They work both ways. Jeremy has answered all my questions within 24 hours.
Rick

 

[DCreed]

Quads Fuel pressure sender is a Stewart Warner Oil Pressure unit. They work both ways. Jeremy has answered all my questions within 24 hours.

Rick

part # ???Oo.

 

[Floyd4runner]

I'm back

Thanks for the tip on the u-jionts, I also has ordered a set of gauges last week also Isspro's. I sold a pickup for a budy and he is paying for them, anyhow. Wanted to ask ya'll, I have an adrenaline with pulse, airdog 100, and EGT, boost, Fuel press gauge ordered. I thought about getting the a-piller mount for the pulse and get the tri pod for the dash. Is this what I should do or do the a-pillar for the gauges?

 

[DCreed]

there is a thread somewhere on gauge mounts, but it is user preference. I have a triple pillar of Isspros already and will mount the pulse on the center heater vent.

 

[Cummins724]

there is a thread somewhere on gauge mounts, but it is user preference. I have a triple pillar of Isspros already and will mount the pulse on the center heater vent.

Hey, I just want to let you know that I got the pillar mount for the Pulse. When I removed my Pulse from the heater, I realized that I smashed a wire in the pulse harness by catching it with one of the locks on the plastic bezel. Be careful.

 

[DCreed]

thanks!

 

[JesseJ]

I set mine up the same as you, in the heater vent, but I taped the harness down to the plastic as I routed it so it wouldn't get pinched anywhere. Just a suggestion.

 

[Bob Cochran]

They are available on Quad's website for $50. Yes, I had to pay, but as was mentioned, the price was dropped when I purchased it originally to make up for the shortcoming.

I just looked on the website and did not see the sensor anyplace. HELP!!!!