Engine/Transmission (1998.5 - 2002) Quad-adrenalin

[Bob Cochran]

Is this sensor still working ok for you? Quad still has not started to supply one yet!!! I just noticed the one they show looks like it takes 2 wires I suppose one is ground right. The Adrenaline only has one wire. Or would the one for the Quadzilla RECON XZT 40PSI single wire be better?

I miss read darkhorse post his not running the Adrenaline was just saying where to get a sensor that works at Glacier Diesel Power. Soooo has anybody used this sensor and how is it working?

 

[BWagnaar]

Is any one else running the adr2025 or adr2015? I'm trying the 2025 tune and the turbo timer is not working? the ADRCOMP tune would work on my computer either. Is the comp tune working for others? and how do you get the turbo timer to work when you shut it off. My truck just shuts off, even when I dont touch the brake petal or gas.

 

[AllianceDiesel]

we have tried all the comp tunes and dyno and everything performance tune and we havn't had any problems.

 

[Cummins Thunder]

My truck has a bad shudder at 3000rpm -up ever since I loaded the latest comp tune. I've tried going back to ADR2000 & now that tune does it. I have the custom tuning & tried to fix the issue by adjusting stuff, nothing changes? Hey, nice video man! That thing runs good.

You have the custom tuning software? If so, how did you get it?

 

[Cummins724]

You have the custom tuning software? If so, how did you get it?

I am a beta tester for the Adrenaline.

 

[JoeCanuck]

Ok... reviving an old thread. Has anybody found a reliable fuel pressure sender that will work with the Adrenaline?

Quad is telling me it will be another month or so.

 

[AllianceDiesel]

Glacier Diesel Power - Product Detail



Thats the only one I have been able to find

 

[delliott]

I have that same ISSPRO sender that Glacier Diesel sells (R8917-03) hooked up to my Adrenaline. It works, but it's a 100psi sender, so it reads about 40-50% lower than actual. (shows 9psi at idle vs. 18psi using mechanical gauge)

 

[darkhorse]

Ok... reviving an old thread. Has anybody found a reliable fuel pressure sender that will work with the Adrenaline?



Quad is telling me it will be another month or so.

It's sure taking a long time to find a suitable sender. It would seem there is at least one fly in everyone's tuner ointment.

 

[Bob Cochran]

I have been waiting for Quad to get a sender since June!!! I gave up and bought the ISSPRO sender that Glacier Diesel. I have been out of town in fact still am so have not installed yet. I don't remember the part number or pressure of the sender. As for reliability and how well it works cannot comment until it is on for awhile. Gee did not know about the thing showing half pressure that is a pain in the behind!!!

 

[DCreed]

I talked to tech support yesterday, they said they DO have a sender in mind but will need to test before it is available so will be about a month. I am currently using a Cyberdyne digital FP, sender has been fine but the LEDs in the gauge keep going out!

 

[Bob Cochran]

Ok a little problem today with the Pulse display module. Yesterday I disconnected the negative terminals from batteries as I was replacing the OH console wiring harness. I probably did not need to but thought was being safe and maybe I should not have done it!!! After connecting back up the negative battery terminals the new OH wiring harness fixed my problem map light switch broken. HOWEVER now the Pulse display only flashes the back light but it does not stay on or display anything.



Called tech support and explained what happened. He suggested several things to try. 1) fuse # 9 and it was not blown and there was 12 volts out. 2) unplug large connector the the Adrenaline module and reconnect did not fix the no display. 3) Update the Adrenaline Module I did that and still no display. 4) Return the Pulse display module ONLY. Tomorrow will be getting the RMA number to return. Frustrating if the disconnect reconnect of the batteries wipe out the Pulse!!!! If this is the case I suggest we need to unplug the Pulse before doing any electrical work!!!!



I had before the display went south; running ADR1025 with it set on power level #1 for better MPG. Now that I have updated it with ADR1025 again will the power level still be on #1. I will be towing my 14,000# 5ER week after next and I usually tow with the level at #3 or #4. If it is now set on #1 and IF I don't get the Pulse back before I leave is there a way with the laptop to get the power lever back to 3 or 4? Nobody around up here has a pulse I can borrow to reset the level or for that matter verify it is just the Pulse that is the problem.



As always any thoughts is appreciated for the Adrenaline junkies here.

 

[DCreed]

it will be on "0" unless set. See if Quad or someone here can loan you a pulse or POD. mine came with a POD as the pulse wasnt out yet.

 

[Bob Cochran]

it will be on "0" unless set. See if Quad or someone here can loan you a pulse or POD. mine came with a POD as the pulse wasnt out yet.

"0" well work ok as it is only a 1200 mile round trip and not a lot of mountains. Fmon East Central Arizona to Salt Lake City and back. If it was going to be on "1" I was not looking forward to the pull actually. Since I got to call for a RMA # It just occurred to me to ask them the same question but I have no doubt your right. I don't recall y being very wrong before.

Thanks for the help

 

[Bob Cochran]

Jeremy Tech at Quad verified when updated the program power level is "0". He also does not believe disconnecting and reconnecting negative battery cable had anything to do with problem with the Pulse. One heck of a coincidence from my thinking I will disconnect Pulse in future before doing anything with the batteries!!! They should have my Pulse hopefully by Monday sometime.

 

[AllianceDiesel]

hey quick question, does the usb cable come with the adrenaline, I have installed 3 of them but I can't remember, I know the guy with the first one I installed has the cable but the last one I got didn't. I just didn't know if we went out and bought one or it is suppose to come with it.

 

[DCreed]

What the... ?, Does this look familiar to anyone??

 

[Spunkys Ram]

Uh, little bit. I wonder if the buttons work any better? :-laf

 

[lholley]

What the... ?, Does this look familiar to anyone??

Loading...

 

[wlowe]

What the... ?, Does this look familiar to anyone??

It seems that a lot these companies don't actually manufacture the case for their product, they purchase the case from other companies. I've also seen a couple of products that use the same case that Edge uses for the Attitude.