EDGE Insight CTS Installation.

[TRAMPLINEMAN]

Brocky

Yes, I bought the mount and adapter new from Extreme Diesel. Their site only showed it up to '12 so I called and they confirmed it fits the '14.

Now that I think of it, I might have gotten it from Thoroughbred Diesel. My memory is slipping.

 

[zmos]

Yes, still under warranty. I have 17K miles on the truck and warranty is good till 125K miles. I just had the truck at the dealer last week to have a new hose installed for the power steering. I asked them to do the fuel gauge reflash while I was there. The service manager asked if I was sure I wanted them to reflash it being I have a programmer installed. I laughed and told him that it's not a programmer, it's just gauges to help me monitor whats going on with the truck. He says, oh, good idea.

Sounds like you've got a good dealer at least they interacted with you. I took mine in for the ABS reflash recall and took copies of the TDR TSBs I know I needed. He said ok. They didn't do them. While I was there I complained about the steering wheel being off center. They adjusted. About two weeks later I could almost see the steering wheel as it moved to the 8"o'clock position while driving straight! Looked underneath and both lock nuts were loose on the collar.

 

[Brocky]

Everybody Thanks for all the help and info.. Called Geno's this afternoon and ordered mine.. Will post an update sometime next week when I get it installed

 

[streetdoc]

I love my Insight and just use the provided suction cup mount. Although the pillar mounts are nice, they move the screen to close to my eyes. I have to wear bi-focal glasses so the closer it is the more I have to change the angle of my head.

 

[Brocky]

Thanks Everyone!!! I Got it installed today!! The hardest part was getting the screw for the A piller hold down started.. Ended up putting a little bevel in it with the grinder.. Right now I have the Temp gauge set on EGT1.. What is a good temp to let it cool to before shut down??? and how often and for how long should the little red R come on for regurgerate???

 

[TRAMPLINEMAN]

I also have my main screen temp gauge on egt 1. On the second gauge screen, I have all the other egt gauges set up. I really don't know what the recommended shut off temp is. I normally just wait about a minute then shut it off. My regen light varies. Sometimes it'll be on for 5 minutes, sometimes up to 15 minutes. For how often it comes on, that varies too. Sometimes it'll be two days in a row, sometimes once a week.

 

[TimBrunett]

This is mine today. I've changed it up a few time just to see how I like different info. I did see a rise in all EGTs during a regen and try not to shut down during one. It usually goes up to about 1050-1100.