Here I am

Engine/Transmission (1994 - 1998) fuel plate

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
which fuel plate does a stock transmission handle in a 95 with a auto?going to have timming moved up to 15. 5 and was thinking about a plate at the same time,have access to a #8 now,is that to much?
 
TST says that their #6 plate is ok with a stock auto. Generally, the smaller the number the more power. The #8 plate won't do much in your 160 pump.
 
My stock transmission started slipping with the install of my #8 plate, 97 model. Within about 6 months, with easy driving, it was TOAST. I'd suggest looking into, atleast, a t/c and v/b upgrade so it will take the extra power.



Mikey
 
I have used nothing but a #10 plate and moved it back anywhere from 45-60k toward firewall. Both the stock clutches and automatics have lived a long time doing it this way.



Rick
 
My stock clutch handled all the mods I did (did all at once) for about a week. Then I had to push the plate back 1/2 way so I wouldnt slip. Now its boring !
 
If you have not done anything to the transmission or exhaust upgrades you need to run the #6 plate. It will up the power from 160 hp to 230 and torque from 400 to 605
 
Status
Not open for further replies.
Back
Top