Engine/Transmission (1994 - 1998) h2c 22cm. for twins?

[dbaumann]

hi , i was wondering what all of you might think about using a rebuilt h2c with 22cm housing along with the hx35 hybrid 14cm. i currently have . i'm not looking for all out horsepower i just want a responsive cool running tow vehicle. i'm also thinking about mounting it to the left of the current turbo like the red and white 3500 on enterprise engines web site. any responses would be appreciated. also any pics. of home built twins would be nice thanks.

 

[RyanB]

not sure about that turbo setup but just wondering why you would want to go with that side by side configuration? usually that setup is only used in pulling where one would run a hood stack. I will be running a setup like this but wouldn't want to on a daily driver mainly because of the exaust has to get routed up along side the small turbo and has more chance of contacting things it shouldn't.



Ryan

 

[dbaumann]

i kind of thought it would be easy to work on, and i could retain the heat exchanger in the stock location also the cold side plumbing would be greatly simplified, perhaps at the expense of the hot side. anybody have any comments on the h2c for the primary? does it use the same flange as an ht3b?,hx60,ht60 etc. that is the other reason i thought the side saddle arangement might be useful trying different turbos and or exhaust housings.