Attention: TDR Forum Junkies Well a friend of mine, who is also a TDR member, had a turbo question. The truck is a 98 he bought used that already had the following mods installed: 5x25 injectors from haisley, 191dv, 4. 5k gov springs, and the timing was set to 17. 5*. It had a bad trans when purchased, so he had a full billet built by HTS with a 2100 stall speed converter.
The turbos he is considering are a sps62 and the sps64- the 64 is the largest he can go with the pulling class he wants to run in. Any thoughts or suggestions would be greatly appreciated! Reason I'm asking is there going to be enough fuel to use a 64? I don't know jack about 12V setups and was curious myself. Nick
The turbos he is considering are a sps62 and the sps64- the 64 is the largest he can go with the pulling class he wants to run in. Any thoughts or suggestions would be greatly appreciated! Reason I'm asking is there going to be enough fuel to use a 64? I don't know jack about 12V setups and was curious myself. Nick
Last edited:
those are not injectors, those are garden hoses!! i would double check to make sure that is the size of the injector, DDP stage 4's are 5x. 18's, and they are big injectors. i can tell you right now, if that is the right size of the injector, a sps 64 wont even be close enough to support all that fuel, heck a sps 66 will still be toasty he might want to consider a smaller injector. 
