Here I am

OBD has No power after Edge install... HALP!!

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Easy entry seat function

Recommended Turbo for 2nd swapp

Status
Not open for further replies.
Hey fellas, I've been searching for 2.5 days now and decided to start a post. Thanks in advance for ANY help.
I have a 2011 been running sluggish randomly at 70-80 mph, won't pull hills, even empty. This is a random problem and comes and goes, but getting worse all the time.
To try and help diagnose the issue I ordered an edge CS2 (to replace the super chip) after all got hooked up, the new edge would not fire up. After a couple hours of checking and re checking, I found that the OBD has NO POWER, (#16 pin I believe)
So I've checked every fuse in the box and nothing seems out of order.
I can't seem to find the power source (12v+) to the OBD.
Any suggestions??
Thanks again, long time fan of the TDR and what you guys do!

Wyosmoke
 
Status
Not open for further replies.
Back
Top