Loren
TDR MEMBER
For the last several months, my 1995 automatic has been shifting poorly. From what I learned in the magazine and on this web site I was pretty sure that the throttle position sensor (TPS) was going bad.
I was half right. I bought a new one ($135, discounted price from my local dealer), but before I installed it I thought I would practice the linkage adjustment and voltage test before I removed the old one.
Whadda know? The old one was reading at least 0. 9 volts low at all positions. Adjusting the linkage got the voltage back to where it should have been. I didn't need to install the new one at all. I knew that you have to test the new installation, but until now I didn't know that the old one could go out of adjustment.
The truck now shifts like it was new. I doubt that the nice dealer parts guy will take back the TPS, since it's an electrical part, so I guess that whoever buys the truck will get a spare.
Moral: Don't spend the money for the new part until you're sure you will need it.
Loren
------------------
2000 Quad Cab, 4x4, short bed, six-speed: U. S. Gear exhaust brake, MileMarker Select Drive viscous coupling, Velvet-Ride spring shackles, Painless Wiring circuit box, Optima yellow-top batteries, Super-Glide 5th wheel hitch, Reese folding ball gooseneck hitch, Drawtite front hitch receiver, Tekonsha Sentinel brake controller, Westin nerf bars, Clarion sound system
1995 Standard Cab, 4x4, long bed, automatic: Firestone Ride-Rite air springs, torque converter lock-up switch, 4" cat-back exhaust, Reese 20K 5th wheel hitch, Reese gooseneck hitch, Hayes Micro Control trailer brake controller, 100 gallon bed-mounted fuel tank with 12 volt electric pump & fill nozzle, Swiss Cap fiberglass cap
I was half right. I bought a new one ($135, discounted price from my local dealer), but before I installed it I thought I would practice the linkage adjustment and voltage test before I removed the old one.
Whadda know? The old one was reading at least 0. 9 volts low at all positions. Adjusting the linkage got the voltage back to where it should have been. I didn't need to install the new one at all. I knew that you have to test the new installation, but until now I didn't know that the old one could go out of adjustment.
The truck now shifts like it was new. I doubt that the nice dealer parts guy will take back the TPS, since it's an electrical part, so I guess that whoever buys the truck will get a spare.
Moral: Don't spend the money for the new part until you're sure you will need it.
Loren
------------------
2000 Quad Cab, 4x4, short bed, six-speed: U. S. Gear exhaust brake, MileMarker Select Drive viscous coupling, Velvet-Ride spring shackles, Painless Wiring circuit box, Optima yellow-top batteries, Super-Glide 5th wheel hitch, Reese folding ball gooseneck hitch, Drawtite front hitch receiver, Tekonsha Sentinel brake controller, Westin nerf bars, Clarion sound system
1995 Standard Cab, 4x4, long bed, automatic: Firestone Ride-Rite air springs, torque converter lock-up switch, 4" cat-back exhaust, Reese 20K 5th wheel hitch, Reese gooseneck hitch, Hayes Micro Control trailer brake controller, 100 gallon bed-mounted fuel tank with 12 volt electric pump & fill nozzle, Swiss Cap fiberglass cap