Where to get on dach tripple guage pod

[RSchwarzli]

Where can I get the 3 gauge pod that goes on the edge of the dash? Genoes garage has them for 2nd and3rd gens, but not the 1st's. When can I get one?



Robert

 

[Philip]

Pm Case500D he just removed one from his 93 W350. I don't think it has found a good home yet. He also has some gages with it.

 

["Mad Max"]

Autometer #15002

Rob,



Check out my readers rigs / diesel, and have a look at my dash pics. If that's the pod yer looking for it is Autometer #15002. It is for a 2nd gen Ram. Summit racing carries them and they're very reasonable. Some minor trimming is required and you'll have to epoxy some small 1/4" bolts (or something similar) to the under side of the pod, but the results are sweet. You can run the wires through the dash (drill a couple holes under the pod as I did) or alongside the dash somewhere - your choice depending on how 'neat' you want it to look.

- Sam

 

[dan brooks]

I got mine from US Gear - don't have the prices or part numbers any more though.

 

[RSchwarzli]

I would look at your readers rigs, but ever since they redid the site I can't figgure out how to see them!



This is the dash pod I am thinking of. It was in the W250 when I bought it. I am not sure if this is the same as yours, but if someone would tell me how to find the readers rigs I will compare them.

 

[Lock93]

Contact PDR. I got mine there. Got paint from dealer, and drilled holes in dash to hide wires. Looks okay, but I haven't figured out how to post pics in my readers rides thingy.

 

[RSchwarzli]

Who and what is PDR. I can't say I have heard of them. Does yours look like the one in the picture?

 

[dan brooks]

This is the one I got from US Gear:

 

[BCaldwell]

PDR Piers diesel research Should be a link to them in the venders section

www.piersdiesel.com

Bill

 

["Mad Max"]

<----Look close right here under my name, location - At least on mine the view readers rigs gallery icon is working - moght not be showing on your computer?? Otherwise go up to website features, and readers rigs should come down in a pull-down menu. Here's one of the better pics -

#ad


- Sam

 

[CGauthier]

I got mine from PDR too... very good place to deal with, and it cost me $100 Canadian. Besides, the Godfather works there and we gotta make sure he keeps his job



Carl G

 

[cwienenga]

got mine from gale banks. two pieces, no holes required,ran wires down side with split loom, not to bad. they also have some attractive guages.



cliff

 

[bgilbert]

Just ordered the same thing from www.usgear.com. $20 for top, $26 for base or vice versa and $7 for shipping, comes black paintable surface. Comes with velcro if you wanna use that way, I will be drilling. Thanks Dan for the option. Apparently to some Dodge didn't make a truck before 94. Their # is 800-874-3271 x-650. part#'s pod DC-6530, base DB-5930.

 

[RSchwarzli]

I see a BIG problem. On the choices of little caractures on the side there is no little dude bowing in appreciation. Thanks, that is exactly what I was looking for. Options!

 

[RSchwarzli]

P. S. I honestly don't know how I missed the readers rigs. Thanks again for the help (especially the little arrow so I don't miss it again ).





Robert