Search Results for Query: *

I have them on my 2013 3500 285/75 /18. They are Open Country AT2 Extreme. 34.8" dia. No rubbing on std 3500 suspension, and spare fit up underneath. Only have 7k on them and they are very quiet all things considered. I pull a Montana 5th wheel and they performed perfectly on a 4800 mile trip...

Just completed a 5000 mile roundtrip WA to AZ and return pulling my Montana 2011 3150RL fifthwheel with my 2013 3500 Bighorn SRW long wheel base (385hp/850tq) Aisin with 3.42 gears. 10.9 mpg average for trip. I tow at 58-61mph , so with my larger Toyo 2.85 /75/18 ( 34.8"dia) tires, I'm in 5th...

While pricing a set of Nitto Terra Grappler LT295/70R17 tires with Discount tires the sales rep I was speaking to said that Nitto tires were made by Toyo! He said most people did not know this. I said I had hardly heared of Nitto , but that I knew the Toyo brand name meant high quality. Can any...

I could use the help and advice from those who have experience with these tires. I have stock Michelin LTX A/S in 265/70R17 load range E and wanted a slightly taller tire rated E (no more than around 34. 5 inch OD). Can't find anything out there!. I contacted Tire Rack about the 315 BFGs and...

A three foot length of 5/8 inch heater hose will slip fit over the existing hose. I used a small hose clamp to hold it in place. I have the drain end of the extension zip tied up out of the way toward the front bumper. It works great. I got all this info from TDR issue 45 (Aug/Sept/Oct 2004)...

In my opinion the only way to go is MBRP from Diesel Performance Parts out of Nashville, TN. I have their cat back 4inch single stainless pipe with a 5inch double wall 409 stainless tip. At normal loads it is only a little louder than stock, no drone!, and and when you put your foot into it the...

Are the forged Aluminum 17"x8" wheels new for 2005? I have a 2004. 5 3500 4wd SWB single rear wheel with the optional 5spoke 17x8 Al wheels, which I thought the 2004 brochure said were "cast"! The 2005 brochure says the wheels are forged, but they look the same as mine! Can anyone clarify if my...

I plan to switch over to Valvoline Premium Blue Extreme 5W-40 Synthetic at my next oil change at around 14K miles. It is endorsed by Cummins. You may want to try it. I picked it after looking at all the synthetic options.

Would like to know which synthetic oils meet Cummins specs and approved for the CTD 600engine? Would like to know product name and viscosity. For example Shell Rotella 5w40 synthetic meets CH4 but does not say CI4 as does their non synthetic Rotella T 15w 40. Also what are the AMSOIL specs?

Congratulations! After a long wait and following each others orders you finally got it. After about 900 miles, my milage has been 13. 5 to 14. 8 mpg in the worst of short trip, numerous cold start conditions. I'm running about 20 miles per cold weather start, so this has got to make the milage...

George, Mine arrived at centreville Monday aft on 1/26. I checked with DC the next morning 1/27 and they said it was transferred to Cassens. Later that day my vin was in their vehicle tracking system, but did not show a ship date until the 28th. Hope this helps, Charlie

Hang in there , it won't be long now! George; mine went by truck from the centerville RR yard to my dealer in Pittsburgh, not much further than your place. When I checked with DC at the time it arrived in centerville by UPRR they said it made its second rail connection , must be to a small...

When mine was released I was told by DC that it was going by truck carrier from Saltillo Mexico to a rail site around Laredo TX. From there they gave me a rail car number for UPRR and it went by rail to a yard near East St Louis Il. you can track it when it is on UPRR. From Illinois it went by...

Does anyone know the load rating of the tailgate on a Dodge RAM heavyduty? I have a heavy Harley-Davidson (about 1000lbs with rider) and have been unable to find any specs from DC on the tailgate cable rating. I have seen cables break on older trucks. This could be a serious safety problem...

Oo. Oo. Oo. Happy to announce my new CTD 325/600 was delivered to me today 1/30/04 at 1pm e. s. t. . Baby weighs 6897lbs and is 227. 7 inches long. His name is PONCHO in honor of his birthplace. Has already gone 80 miles on all fours. Both of us are doing great despite the COLD 12 degrees F...

Saw my first advertisement for the Cummins 325/600!!! It was a one page add in the latest issue of Maxim magazine. Showed a big black RAM, almost missed it with all the other good looking models!!! ps. it's page 91 for those who want to skip the rest

Light Almond ---- NUTS!!!

I checked today, my truck is on a rail car in Texas, got UPRR car number etc. Both dealer and DC said there was no hold on it, I specifically asked the DC rep, and he said if there were any problems with mine his report would have indicated that. I find it hard to believe they would pull a truck...

TomeyGun , is this hold on unbuilt trucks? mine went KZ on 1/19 which is released by plant , do you know if it is a part or problem that would affect those trucks already built and on their way? Would like if you could give us more specifics if you can. Did your source know if the hold is...