Here I am

Edge Ez with switches and question

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Trade warranty for POWER?

2001.5?

Status
Not open for further replies.
OK; got tired of the allen wrench and trying to pry that tiny little jumper and worst yet loosing the jumper:( So Fred goes to Radio Shack and grabs two toggle switches and installed them right on the edge ez cover, one for #3 position and the other for #1

:cool: Now all I have to do is pop the hood and toggle what ever switch I feel like and split second later I'm done, why didn't Ez think of that? May be to avoid someone having both switches on? that's my first question what would happen fry the box? sure as heck I'm not trying it. Next question which I tried, leave both switches off same as no jumper, what's the result is it the same as the box removed from the truck? I must admit that I don't really feel the difference between the jumper on #1 and no jumper at all. My next move which I and in mind originally when I had this switch dream is to install them in the cab that way I don't have to stop to make adjustments, sort of edge comp. :D



Your comments suggestion are always appreciated,



Fred.
 
switching EZ

if you only want to switch between two positions, use a double pole, double throw switch. that way you can't switch both "on " at once... ... :)
 
Hey John

Smoke what smoke? This thing only smokes when I go camping with George and the truck is next to the fire ring:rolleyes:

As they say if there is three settings on the box, guess what, I'm going to screw around with them and I figured with the switches would make my life easier, also could have gotten the comp. :D
 
Fred, I would think YOU would want to keep your setting on #2 so you don't throught too much smoke:D :D . Oh wait, I don't remember seeing ANY smoke:D Except when you were near the fire ring (wish I had Scott's camera).

George
 
Status
Not open for further replies.
Back
Top