Anatomy of a Frantz toilet paper bypass oil filter

[Chipstien]

Attention..... Group buy is A-OK

Ok, here's what we can do. We can get them for $110 plus $10 for shipping. So who would be interested? I need to determine how many we can get.

 

[Forrest]

Pls count me in.

 

[fkovalski]

Group order:

Count me in for one (1).

 

[drrhoades]

Group Order

Count me in for 1.

 

[Jim McCarty]

I'm in.

 

[Pawpaw]

I'll buy one.

 

[Froadin]

Does that price include the hoses and fittings for the install kit?

 

[amsoilman]

Here is how to return oil from a "By-pass" oil filter system to a 12 Valve engine "Fill" Cap.



Wayne

amsoilman

 

[amsoilman]

Here is how a BY-PASS oil filter is connected in "Parallel" with "FULL-FLOW" Filter.



NOTE: This is not a very good picture, but it may do someone some good to see how these work together.



This is NOT a Frantz setup, but it is how all external By-Pass oil filters are connected



Wayne

amsoilman

 

[Chipstien]

Originally posted by Froadin

Does that price include the hoses and fittings for the install kit?

It better,





Yes

 

[Jim McCarty]

Originally posted by amsoilman

Here is how to return oil from a "By-pass" oil filter system to a 12 Valve engine "Fill" Cap.



Wayne

amsoilman

SWEET!!

 

[jwinnie]

Count me in for 1

 

[rbattelle]

Pics of the Gulf Coast model

Here's some pics of the one from Ralph Wood (the MG-30 model).

 

[rbattelle]

Bottom side showing fittings...

 

[rbattelle]

Filter halves separated, showing TP (it came with this roll already installed).

 

[rbattelle]

And a shot with no TP in it. Note: there is an o-ring between the halves, and the unit ships with a spare one. There is also a mounting bracket that comes with it... attaches to the tabs on the bottom. I didn't bother to take a pic of it.

 

[rbattelle]

For those 3rd gen guys who might be watching, I will say that I've had some trouble running the return line to the filler cap, due to it's 2-piece design. Here's a pic of the disassembled cap. There's also a spring inside there, but my drill press ate it when I tried to drill holes in both halves.

 

[rbattelle]

To make a long story short, here's what I have come up with so far. It uses a 1/8 NPT elbow and a 1/8 male/female adaptor for oil flow. The bottom half of the cap has been screwed to the top half (notice 3 screws radially).

 

[CFAR]

Count 1 for me

 

[bmoeller]

Frantz group buy.

In for 1.